Fire Rated Shutters

Product Range: Fire Rated Roller Shutters

Fire resisting roller shutters with up to 4 hours fire resistance manufactured to B.S. 476 Part 22 1987.

Common Use:
Commercial & Industrial - Servery counters, fire rated partitions / walls, dual purpose security shutter.

75mm Curved Galvanised Lath in 20 SWG (0.9mm). Finishes available include Galvanised or Powder Painted to RAL reference colour...

Bottom Rail:
T-Section Galvanised Steel as standard.

Roller Barrel:
Manufactured from seamless mild steel tube of 4”/5”/6” diameter with suitable wall thickness to minimise deflection as outlined in BRE fire test report.

Side Guides:
Manufactured from preformed galvanised steel sections of sizes:
 75 x 32 x 3mm, 100 x 32 x 3mm or 105 x 45 x 3mm Captive

End Plates:
Manufactured from mild steel plate, incorporating fixing angles as required. Typical sizes are 530 x 305mm & 305 x 305mm, 650 x 400mm.
Sizes are dependant on motor type and height of the opening.

1 or 3 phase industrial motors with chain and sprocket drive, chain override, independent safety brake and fusible link / solenoid device. Under activation door descends via controlled gravity descent.

As standard by means of a push button with low voltage supply. Controls available include keyswitch, rocker switch and remote control

Optional Extras:
Extras include:   
Photocells, Battery Back Up UPS, A/V Fire Relays, and Two Stage Closing

Securiscreen Shutters & Doors Limited, Derrycrib, Donadea, Naas, Co. Kildare
T + 353 1 626 2972 - M + 353 87-227 4568 - E